Custom Closets in Denver

Gribbons Group Corp builds custom walk-in and reach-in closets across the Denver metro, as part of a larger remodel or as a standalone project.

A good closet makes every morning a little easier. A bad one is a rod, a shelf, and a pile on the floor. Because we’re a licensed & insured general contractor, we can move a wall, add lighting, or borrow space from the room next door when shelving alone won’t solve the problem.

Want to talk through a closet project? Call (720) 223-9003 or request a free estimate.

Walk-In Closets

A walk-in closet is a small room, and it should be planned like one. The layout starts with what you own and how you get dressed, not with a catalog of components.

• Layout. Single-wall, L-shaped, U-shaped, or a two-sided walk-through. The right choice depends on the room’s width, where the door and window fall, and whether the closet connects to a bathroom.
• Clear floor space. Enough room to turn around, open drawers, and pull things off high shelves without backing into the opposite wall.
• Hanging zones. Double-hang sections for shirts and folded pants, long-hang for dresses and coats, and a clear count of how many linear feet each person needs.
• Drawers and shelves sized for what goes in them: shallow drawers for accessories, deeper ones for sweaters, adjustable shelves for folded clothes and bags.
• Shoe storage as angled or flat shelves, sized to your shoes rather than a generic spacing.
• An island with drawers and a countertop, if the room is wide enough to walk around it comfortably.
• A place to sit, a mirror, and a hamper or laundry pull-out.

If your current walk-in is too small or awkwardly shaped, that’s often where a general contractor earns its keep. Relocating a door, reframing a wall, or combining a closet with a little-used space can make more difference than any shelving system.

Common Closet Problems We Fix

• Dead corners in L- and U-shaped closets where clothes disappear. Corner shelving or a reworked layout gets that space back.
• Wasted height. A single rod and shelf in a room with a tall ceiling leaves a lot of storage unused. Upper shelves and double-hang sections put it to work.
• Doors that fight the layout. A swing door that blocks shelving can often be replaced with a pocket or sliding door, or moved.
• No light where you need it. One fixture in the middle of the ceiling casts shadows into every shelf.
• A dresser that doesn’t fit the bedroom. Moving drawers into the closet frees up floor space in the room.

Reach-In Closets

Reach-in closets in bedrooms, entries, and hallways can hold far more when they’re built out properly:

• Full-width openings, or wider doors, so you can reach the corners instead of losing them behind a narrow door.
• Double-hang rods and adjustable shelves in place of a single rod and shelf.
• Drawer units inside the closet to replace a dresser in a small bedroom.
• Entry and mudroom closets with hooks, bench storage, and space for boots and bags.
• Linen and pantry closets with shelves at depths that fit what’s stored.

Built-Ins

Custom closets are one kind of built-in; we also build them throughout the house. Built-in cabinetry and shelving can go in a bedroom wall, an office, a mudroom, or the basement, and they’re often designed at the same time as the closet so finishes match.

• Materials range from painted cabinetry to stained wood to durable melamine and laminate systems. We help you choose based on how the space is used and what it needs to look like.
• Hardware like soft-close drawers, pull-out valet rods, and tie and belt racks is chosen during design, not added later.
• Fit. Built-ins are scribed to real walls, which are rarely perfectly square, so there are no awkward gaps at the edges.
• Wall backing for heavy cabinets and island tops, planned before drywall when the closet is part of a remodel.

Closet Lighting

Lighting is what makes a closet feel finished and lets you tell navy from black. Options we plan:

• Ceiling fixtures or recessed lights for general light, positioned so shelving and doors don’t block them.
• LED strip lighting integrated into shelving or under hanging rods.
• Motion or door-activated switching so the light comes on as you walk in.
• Lighting at the mirror for getting dressed.

Closet lighting has its own electrical code rules, including required clearances between fixtures and storage areas. We choose fixtures and locations that meet them, and any new circuits or fixtures are done by licensed electricians as part of the job.

As Part of a Remodel or on Its Own

As part of a remodel. The best time to rethink a closet is when walls are already open. In a primary suite or bathroom remodel, a closet can be enlarged, connected to the bath, given better lighting, and built with backing for heavy cabinetry, all before drywall. In a basement finish, a bedroom closet and a storage room with real shelving are easy to include.

As a standalone project. You don’t need a whole-house remodel to get a better closet. We handle standalone closet projects too, from building out an existing walk-in to reconfiguring a closet with new framing, lighting, and finishes.

If you’re finishing a basement, it’s worth reading what you can put in a finished basement: good closets and storage rooms are some of the most useful spaces down there.

Permits and Planning Notes

Installing shelving and cabinetry in an existing closet usually doesn’t change anything structural. Moving walls, adding circuits, or building a closet as part of a larger remodel is different, and those jobs can require a building permit depending on your city or county. We confirm with your building department before work starts and handle the application and inspections when one is required.

On the first visit we also check whether a wall you want to move is load-bearing and where ductwork, plumbing, or wiring runs inside it.

How a Custom Closet Project Works

1. Visit. We measure the space, look at what you store, and talk through how you use the closet.
2. Design. A layout with hanging, drawers, shelves, lighting, and any framing or door changes.
3. Written scope and estimate. Materials, hardware, lighting, and any construction work spelled out.
4. Permits, if needed. For wall changes or new circuits.
5. Build. Framing and electrical first if needed, then drywall and paint, then cabinetry, hardware, and lighting.
6. Walkthrough. We adjust shelves and drawers with you before we call it done.

More on how we work is on our process page.

Licensed & Insured

Gribbons Group Corp is licensed & insured and holds these contractor licenses: Douglas County #A260170, Jefferson County Class B #1028872, City of Littleton #AEC002126, and City of Arvada #AEC13870. We confirm the permitting jurisdiction for your property during the first conversation.

Other projects people pair with a closet: bathroom remodels, basement finishing, and specialty rooms like home theaters, custom wine cellars, cigar lounges, and home spas and saunas. Most of these rooms go in as part of a basement finish; see our pages for Denver, Lakewood, Aurora, Centennial, Parker, and Castle Rock.

Custom Closet FAQs

Do you only build closets as part of a bigger remodel?

No. We build closets as part of remodels and as standalone projects. A remodel is the best time to change walls or lighting, but a standalone build-out works well too.

Can you make my walk-in closet bigger?

Often, yes. Moving a wall, relocating a door, or borrowing space from an adjacent room can make a big difference. We check whether walls are load-bearing and what runs inside them before recommending changes.

What materials do you use for closet built-ins?

Painted or stained cabinetry and durable melamine or laminate systems are the common choices. We help you choose based on use, look, and budget.

Can you add lighting to an existing closet?

Yes. Ceiling fixtures, LED strips in shelving, and motion switching are common. New fixtures are installed to electrical code, including clearances from storage areas.

Do I need a permit for a closet?

Shelving in an existing closet usually doesn’t change anything structural. Moving walls or adding circuits can require a permit depending on your jurisdiction. We confirm and handle it if needed.

How much does a custom closet cost?

Size, materials, drawers and hardware, lighting, and any framing or electrical work drive cost. We don’t publish a price list; you get a written, itemized estimate after a visit.

Request a Free Custom Closet Estimate

Tell us about the closet you have and the one you want. We’ll set up a visit and follow up with a written scope and estimate.

Call (720) 223-9003 or email sean@ggcbuilds.com.